Change your nissan rogue oil in record time: step-by-step guide

Changing the oil in your Nissan Rogue is a crucial maintenance task that ensures the longevity and performance of your vehicle. Whether you’re a seasoned DIYer or a novice, this comprehensive guide will empower you with the knowledge and steps to change your Nissan Rogue oil like a pro.

Tools and Materials

Before you embark on your oily adventure, gather the following tools and materials:

• New oil filter (consult your owner’s manual for the recommended type)
• New motor oil (check your owner’s manual for the recommended viscosity and capacity)
• Oil pan
• Funnel
• Socket wrench or adjustable wrench
• Gloves
• Rags or paper towels

Safety Precautions

• Park your Nissan Rogue on a level surface and engage the parking brake.
• Allow the engine to cool completely before starting any work.
• Wear gloves to protect your hands from hot oil.
• Avoid spills and dispose of used oil properly.

Step 1: Locate the Oil Drain Plug

• Slide under your Nissan Rogue and locate the oil drain plug. It’s usually a bolt at the bottom of the oil pan.

Step 2: Drain the Old Oil

• Place the oil pan under the drain plug.
• Using the socket wrench or adjustable wrench, carefully loosen the drain plug.
• Allow the old oil to drain into the pan.
• Once the oil has drained completely, replace the drain plug and tighten it securely.

Step 3: Replace the Oil Filter

• Locate the oil filter housing. It’s usually a cylindrical canister on the side of the engine.
• Using the socket wrench or adjustable wrench, loosen the oil filter cap.
• Remove the old oil filter and discard it.
• Apply a thin layer of new oil to the gasket of the new oil filter.
• Screw on the new oil filter hand-tight, then tighten it an additional 3/4 to 1 turn using the wrench.

Step 4: Add New Oil

• Using the funnel, pour the recommended amount of new motor oil into the engine.
• Refer to your owner’s manual for the specific capacity.
• Use the dipstick to check the oil level. It should be between the “min” and “max” marks.

Step 5: Start the Engine and Check for Leaks

• Start the engine and let it run for a few minutes.
• Check for any leaks around the oil drain plug and oil filter.
• If you notice any leaks, tighten the appropriate bolts or consult a mechanic.

Step 6: Reset the Oil Life Monitor

• If your Nissan Rogue has an oil life monitor, you’ll need to reset it after changing the oil.
• Consult your owner’s manual for the specific instructions on how to reset the oil life monitor.

Step 7: Dispose of Used Oil and Filter Properly

• Pour the used oil into an approved container.
• Dispose of the used oil and filter at a recycling center or hazardous waste facility.

Final Note: The Key to a Smooth-Running Nissan Rogue

Changing the oil in your Nissan Rogue is a relatively straightforward task that can save you money and extend the life of your vehicle. By following the steps outlined in this guide, you can confidently perform this essential maintenance and keep your Nissan Rogue running smoothly for years to come.

What You Need to Learn

Q: How often should I change the oil in my Nissan Rogue?
A: Consult your owner’s manual for the recommended oil change interval. Typically, it’s around 5,000 to 7,500 miles.

Q: What type of oil should I use in my Nissan Rogue?
A: Refer to your owner’s manual for the recommended viscosity and type of motor oil.

Q: Can I use synthetic oil in my Nissan Rogue?
A: Yes, synthetic oil is an excellent choice for most Nissan Rogues and provides superior protection and longer intervals between oil changes.

Q: How do I check the oil level in my Nissan Rogue?
A: Remove the dipstick, wipe it clean, reinsert it fully, and then pull it out again. The oil level should be between the “min” and “max” marks.

Q: What are the signs of low oil levels?
A: Low oil levels can lead to engine damage. Common signs include an illuminated oil light, engine knocking, and reduced engine performance.