Diy transmission fluid change for nissan rogue: step-by-step guide to save money

Maintaining your Nissan Rogue‘s transmission is crucial for its longevity and performance. Changing the transmission fluid is an essential part of this maintenance routine. This comprehensive guide will provide you with a step-by-step breakdown of how to change Nissan Rogue transmission fluid, ensuring a smooth and efficient transmission system.

Tools and Materials You’ll Need

• New Nissan Rogue transmission fluid (check your owner’s manual for the recommended type)
• Drain pan
• Funnel
• 10mm socket wrench
• 17mm socket wrench
• Torque wrench
• Rags or shop towels

Safety First

• Park your Nissan Rogue on a level surface.
• Engage the parking brake to prevent the vehicle from rolling.
• Allow the engine to cool down before starting any work.

Step 1: Locate the Transmission Drain Plug

• Crawl under the vehicle and locate the transmission drain plug. It is typically a 17mm bolt on the bottom of the transmission pan.

Step 2: Drain the Old Fluid

• Place the drain pan under the drain plug.
• Using the 17mm socket wrench, carefully loosen the drain plug.
• Allow the old fluid to drain completely into the pan.

Step 3: Clean the Drain Plug

• Once the fluid has drained, use a rag to clean the drain plug and its threads.
• Apply a small amount of anti-seize compound to the threads to prevent them from seizing in the future.

Step 4: Reinstall the Drain Plug

• Hand-tighten the drain plug back into the transmission pan.
• Using the torque wrench, tighten the drain plug to the specified torque (refer to your owner’s manual).

Step 5: Locate the Transmission Fluid Fill Plug

• Move to the top of the transmission and locate the fluid fill plug. It is typically a 10mm bolt on the side of the transmission.

Step 6: Add New Fluid

• Insert the funnel into the fill plug hole.
• Pour the new transmission fluid into the funnel until it starts to overflow.

Step 7: Check the Fluid Level

• Remove the funnel and replace the fluid fill plug.
• Start the engine and allow it to run for a few minutes.
• Shift through all the gears and back to park.
• Turn off the engine and wait a few minutes for the fluid to settle.
• Using a dipstick or the transmission fluid level check procedure outlined in your owner’s manual, check the fluid level.

Step 8: Adjust the Fluid Level (if Necessary)

• If the fluid level is low, add more fluid through the fill plug until it reaches the correct level.
• If the fluid level is high, drain some fluid through the drain plug until it reaches the correct level.

Final Checks

• Double-check that both the drain plug and the fluid fill plug are properly tightened.
• Inspect the area for any leaks.
• Reset the transmission fluid life monitor (if applicable).

Troubleshooting

• Fluid is leaking: Check that the drain plug and fluid fill plug are properly tightened. If the leak persists, consult a mechanic.
• Transmission shifts roughly: Ensure that the correct type of fluid has been used and that the fluid level is correct. If the problem persists, a transmission fluid flush may be necessary.

Maintenance Schedule

• Nissan recommends changing the transmission fluid every 30,000-60,000 miles or as indicated by the transmission fluid life monitor.
• Severe driving conditions, such as towing or frequent off-roading, may require more frequent fluid changes.

Popular Questions

Q: How much transmission fluid does a Nissan Rogue take?
A: The amount of transmission fluid required varies depending on the year and model of your Nissan Rogue. Refer to your owner’s manual for the exact amount.

Q: Can I use any type of transmission fluid in my Nissan Rogue?
A: No, it is important to use the type of transmission fluid recommended by Nissan. Using the wrong type of fluid can damage the transmission.

Q: How often should I change the transmission fluid in my Nissan Rogue?
A: Nissan recommends changing the transmission fluid every 30,000-60,000 miles or as indicated by the transmission fluid life monitor.