How to fix a drooping nissan murano sun visor (with pictures)

The sun visor in your Nissan Murano is an essential component for blocking out the sun’s glare while driving. However, over time, the visor can become loose, broken, or malfunctioning. If you’re experiencing any issues with your Murano’s sun visor, don’t worry—it’s a relatively easy fix that you can do yourself with a few simple tools.

Materials You’ll Need

• Phillips head screwdriver
• Flat head screwdriver
• Torx bit set
• Replacement sun visor (if necessary)

Steps to Fix a Loose Sun Visor

1. Locate the screws: There are two screws located on the underside of the sun visor. Use a Phillips head screwdriver to remove these screws.
2. Detach the visor: Once the screws are removed, gently pull down on the visor to detach it from the headliner.
3. Tighten the hinge: The visor is attached to the headliner by a hinge. If the visor is loose, the hinge may need to be tightened. Use a Torx bit to tighten the hinge screws.
4. Reattach the visor: Once the hinge is tightened, reattach the visor to the headliner. Align the visor with the holes in the headliner and insert the screws. Tighten the screws using a Phillips head screwdriver.

Steps to Fix a Broken Sun Visor

1. Remove the visor: Follow the steps outlined in the previous section to remove the sun visor from the headliner.
2. Inspect the visor: Examine the visor for any visible damage. If the visor is cracked or broken, it will need to be replaced.
3. Replace the visor: If the visor is broken, you will need to purchase a replacement visor. The replacement visor should be the same color and style as the original visor. To install the replacement visor, simply follow the steps outlined in the previous section.

Steps to Fix a Malfunctioning Sun Visor

1. Check the wiring: The sun visor is powered by a small electric motor. If the visor is not functioning, the wiring may be damaged. Use a flat head screwdriver to pry open the visor and inspect the wiring. If the wiring is damaged, it will need to be repaired or replaced.
2. Replace the motor: If the wiring is not damaged, the electric motor may be faulty. To replace the motor, you will need to purchase a new motor that is compatible with your Murano. Once you have the new motor, follow these steps:

• Remove the visor from the headliner.
• Disconnect the electrical connector from the motor.
• Remove the screws that hold the motor in place.
• Install the new motor and tighten the screws.
• Reconnect the electrical connector.
• Reattach the visor to the headliner.

Additional Tips

• If you are having difficulty removing the sun visor, you can use a trim removal tool to pry it loose.
• When tightening the screws, be careful not to overtighten them. This can damage the sun visor or the headliner.
• If you are not comfortable performing any of these repairs yourself, you can take your Murano to a qualified mechanic.

Troubleshooting Common Sun Visor Problems

• The sun visor is loose: The visor may be loose due to worn-out hinges. Tighten the hinge screws to resolve this issue.
• The sun visor is broken: The visor may be broken due to excessive force or impact. Replace the broken visor with a new one.
• The sun visor is not functioning: The visor may not be functioning due to a faulty electric motor or damaged wiring. Check the wiring and replace the motor if necessary.
• The sun visor is making a noise: The visor may be making a noise due to a loose hinge or a worn-out motor. Tighten the hinge screws or replace the motor to resolve this issue.

Wrapping Up

Fixing a Nissan Murano sun visor is a relatively simple task that can be completed in a matter of minutes. By following the steps outlined in this guide, you can easily restore your sun visor to proper working order. If you encounter any difficulties during the repair process, don’t hesitate to consult a qualified mechanic for assistance.

Top Questions Asked

Q: How can I prevent my sun visor from breaking?
A: To prevent your sun visor from breaking, avoid applying excessive force to it and store it in a safe place when not in use.

Q: How often should I clean my sun visor?
A: It is recommended to clean your sun visor every few months to remove dirt and dust. Use a soft cloth and a mild cleaning solution to clean the visor.

Q: Can I replace the sun visor cover?
A: Yes, you can replace the sun visor cover if it becomes damaged or faded. The replacement cover should be the same color and style as the original cover.