Hyundai kona jacking made simple: essential tips and tricks

Performing routine maintenance or repairs on your Hyundai Kona may require lifting it off the ground. Jacking up your vehicle safely and correctly is essential to prevent injuries and damage to your car. This comprehensive guide will provide you with step-by-step instructions, safety precautions, and essential tips on how to jack up your Hyundai Kona.

Safety Precautions

• Park your Kona on a level surface and engage the parking brake.
• Place wheel chocks behind the wheels opposite the jacking point.
• Wear safety glasses and gloves for protection.
• Never crawl under a car supported only by a jack.
• Use only the designated jack points on your Kona’s frame.

Designated Jack Points

Your Hyundai Kona has designated jack points located on the frame. These points are designed to withstand the weight of your vehicle and provide a stable lifting point.

• Front Jack Points: Located on the pinch welds behind the front wheels.
• Rear Jack Points: Located on the pinch welds in front of the rear wheels.

Step-by-Step Instructions

Materials:

• Jack
• Jack stands (optional but recommended)

Steps:

1. Locate the Jack Point: Identify the designated jack point nearest to the wheel you need to lift.
2. Insert the Jack: Place the jack under the jack point and pump it until it makes contact with the frame.
3. Raise the Vehicle: Continue pumping the jack until the vehicle is lifted approximately 6 inches off the ground.
4. Secure with Jack Stands (Optional): If you’re performing extensive work, it’s recommended to place jack stands under the vehicle for added stability.
5. Lower the Vehicle: Once you’re finished, slowly lower the jack to bring the vehicle back to the ground.
6. Remove the Jack: Once the vehicle is fully on the ground, remove the jack.

Tips for Safe Jacking

• Check the jack and jack stands for any damage or defects before use.
• Ensure the jack is stable and securely placed under the jack point.
• Do not lift the vehicle higher than necessary.
• Never lift a vehicle by the bumper or suspension components.
• Always use wheel chocks to prevent the vehicle from rolling.

When to Jack Up Your Kona

• Tire changes
• Brake pad replacement
• Oil changes
• Suspension work
• Underbody inspections

In a nutshell

Jacking up your Hyundai Kona is a relatively straightforward process that can be performed safely and efficiently with the proper tools and precautions. By following the instructions outlined in this guide, you can ensure a stable and secure lifting experience for your vehicle.

Frequently Asked Questions

Q: Can I use any jack to lift my Hyundai Kona?
A: No, it’s essential to use a jack specifically designed for automotive use and rated to handle the weight of your Kona.

Q: How often should I inspect my jack and jack stands?
A: Regularly inspect your jack and jack stands for any damage or wear and tear. Replace them immediately if any issues are found.

Q: Can I leave my Kona on jack stands for extended periods?
A: It’s not recommended to leave your Kona on jack stands for extended periods as it can put stress on the frame and suspension components.