Jumpstart your 2015 chevrolet equinox in 5 easy steps
What To Know
- Connect one end of the red (positive) jumper cable to the positive terminal of the dead battery in your Equinox.
- Connect the other end of the black cable to an unpainted metal surface on your Equinox’s engine block, away from the battery.
- Start the engine of the working vehicle and let it run for a few minutes to charge the dead battery.
Are you stuck with a dead battery and a stranded 2015 Chevrolet Equinox? Don’t worry; jumpstarting your vehicle is a simple process that can get you back on the road in no time. Follow our step-by-step guide to learn how to jumpstart your 2015 Chevrolet Equinox safely and effectively.
Before You Start
Before you jumpstart your Equinox, gather the necessary materials:
- Jumper cables
- A working vehicle with a fully charged battery
- Safety glasses (optional)
Safety Precautions
- Park both vehicles close enough for the jumper cables to reach, but not touching.
- Put both vehicles in park or neutral and engage the parking brake.
- Turn off the engines of both vehicles.
- Wear safety glasses to protect your eyes from battery acid.
Step-by-Step Instructions
1. Locate Battery Terminals
In the 2015 Chevrolet Equinox, the battery is located under the hood on the passenger side. Identify the positive (+) and negative (-) terminals on the battery.
2. Connect Jumper Cables
- Connect one end of the red (positive) jumper cable to the positive terminal of the dead battery in your Equinox.
- Connect the other end of the red cable to the positive terminal of the working vehicle’s battery.
- Connect one end of the black (negative) jumper cable to the negative terminal of the working vehicle’s battery.
- Connect the other end of the black cable to an unpainted metal surface on your Equinox’s engine block, away from the battery.
3. Start Working Vehicle
Start the engine of the working vehicle and let it run for a few minutes to charge the dead battery.
4. Start Stalled Vehicle
Once the dead battery has been charged for a few minutes, try starting your Equinox. If the engine starts, remove the jumper cables in reverse order of how they were connected.
5. Drive for 30 Minutes
Drive your Equinox for at least 30 minutes to fully recharge the battery.
Troubleshooting
- Engine won’t start: Ensure the jumper cables are securely connected and the battery terminals are clean. If the engine still won’t start, the battery may be too weak or damaged and may need to be replaced.
- Cables spark: If sparks occur when connecting the jumper cables, the terminals may be corroded. Clean the terminals with a wire brush before connecting the cables.
- Battery leaks: If you notice any fluid leaking from the battery, do not start the vehicle. Call a mechanic for assistance.
Tips for Avoiding Dead Batteries
- Regularly check your battery terminals for corrosion and clean them if necessary.
- Avoid leaving lights or accessories on when the engine is off.
- Replace your battery every 3-5 years.
- Have your alternator checked regularly to ensure it is charging the battery properly.
Wrapping Up
Jumpstarting your 2015 Chevrolet Equinox is a simple process that can save you from a costly tow truck call. By following the steps outlined in this guide, you can safely and effectively get your vehicle back on the road. Remember to take precautions and seek professional assistance if necessary.
Answers to Your Questions
Can I jumpstart my Equinox without another vehicle?
Yes, you can use a portable jump starter to provide power to your Equinox’s battery.
How long can I drive with a dead battery?
It is not recommended to drive with a dead battery as it can damage the vehicle’s electrical system.
What causes a car battery to die?
Common causes include leaving lights or accessories on, a faulty alternator, or a weak battery.