Unlock the secrets of key fob programming: a comprehensive guide for 2006 subaru foresters

Are you tired of the hassle of carrying multiple keys or dealing with a malfunctioning key fob for your 2006 Subaru Forester? The solution lies in programming a new key fob yourself, saving you time and money. This comprehensive guide will walk you through the step-by-step process of programming a 2006 Subaru Forester key fob, empowering you to regain control over your vehicle’s access.

What You’ll Need

Before embarking on this DIY project, ensure you have the following:

• A new or spare key fob for your 2006 Subaru Forester
• A working master key for your vehicle
• A flathead screwdriver or key fob programming tool

Step-by-Step Programming Guide

1. Prepare Your Vehicle

• Park your Forester on a flat, stable surface and engage the parking brake.
• Turn the ignition to the “ON” position, but do not start the engine.

2. Access the Programming Mode

• Insert the master key into the ignition and turn it to the “ON” position.
• Within 10 seconds, remove the master key and reinsert it.
• Repeat this process four more times (insert, turn to “ON,” remove).

3. Confirm Programming Mode

• After the fifth insertion, the security light on your dashboard should start blinking rapidly. This indicates that you are now in programming mode.

4. Program the New Key Fob

• Take the new key fob and hold down the “Unlock” and “Lock” buttons simultaneously.
• Continue holding the buttons for approximately 10 seconds, or until the security light stops blinking and stays illuminated.

5. Release the Buttons and Test

• Release the buttons on the new key fob.
• Remove the master key from the ignition.
• Press the “Unlock” button on the new key fob to unlock the doors. This confirms that the new key fob is successfully programmed.

6. Program Additional Key Fobs (Optional)

• If you have additional key fobs to program, repeat steps 4 and 5 for each fob.

7. Exit Programming Mode

• To exit programming mode, turn the ignition to the “OFF” position.
• Remove the master key from the ignition. The security light should turn off.

Tips and Troubleshooting

• If the security light does not start blinking after the fifth insertion, repeat steps 2 and 3.
• Make sure that the new key fob is compatible with your 2006 Subaru Forester.
• If the new key fob does not unlock the doors after programming, check if the battery in the fob is functional.
• If you encounter any difficulties, consult your vehicle’s owner’s manual or contact a qualified automotive locksmith.

Wrapping Up

Congratulations! You have successfully programmed a new key fob for your 2006 Subaru Forester. By following these simple steps, you have saved time and money while regaining control over your vehicle’s access. Remember, if you have any further questions or encounter any issues, don’t hesitate to seek professional assistance.

Information You Need to Know

Q: Can I program a key fob for my 2006 Subaru Forester if I don’t have a master key?
A: No, you need a working master key to access programming mode.

Q: How many key fobs can I program for my vehicle?
A: Typically, you can program up to four key fobs for your 2006 Subaru Forester.

Q: What happens if I lose my master key?
A: If you lose your master key, you will need to contact a Subaru dealership or a qualified automotive locksmith to obtain a replacement key and program it for your vehicle.