Unlock your subaru’s potential: how to program a 2010 forester key fob effortlessly
What To Know
- If you’ve lost or damaged your key fob, or if you’ve purchased a used Forester with unprogrammed key fobs, this guide will provide you with step-by-step instructions on how to program it yourself.
- You only need to program your key fob if it has been lost, damaged, or if you’ve purchased a used vehicle with unprogrammed key fobs.
- If you lose your only working key fob, you’ll need to contact a qualified automotive locksmith or your Subaru dealer to have a new key fob programmed and cut.
Programming your 2010 Subaru Forester key fob is a crucial task for ensuring the security and functionality of your vehicle. If you’ve lost or damaged your key fob, or if you’ve purchased a used Forester with unprogrammed key fobs, this guide will provide you with step-by-step instructions on how to program it yourself.
Materials You’ll Need
- New or replacement key fob
- Existing working key fob
- Pen or pencil
Step 1: Gather Your Materials
Before you begin, make sure you have all the necessary materials. You’ll need the new or replacement key fob, an existing working key fob, and a pen or pencil.
Step 2: Locate the Keyless Entry Programming Switch
Open the driver’s door and locate the keyless entry programming switch. It’s usually found on the bottom left of the dashboard, near the steering wheel.
Step 3: Insert and Remove the Existing Key Fob
Insert your existing working key fob into the ignition and turn it to the “ON” position. Do not start the engine. Remove the key fob and insert it back into the ignition within 10 seconds.
Step 4: Press and Hold the Programming Switch
Press and hold the keyless entry programming switch for 5 seconds. The door locks will cycle once to indicate that the programming mode has been activated.
Step 5: Press the Lock Button on the New Key Fob
Within 10 seconds of pressing the programming switch, press the lock button on the new key fob. The door locks will cycle again to confirm that the new key fob has been programmed.
Step 6: Repeat for Additional Key Fobs
If you have multiple key fobs to program, repeat steps 3-5 for each additional fob. You can program up to four key fobs to your vehicle.
Step 7: Exit Programming Mode
To exit programming mode, simply turn the ignition to the “OFF” position. The door locks will cycle once to indicate that programming is complete.
Troubleshooting
If you encounter any issues while programming your key fob, try the following:
- Make sure you’re using the correct key fob.
- Ensure that the battery in the new key fob is fresh.
- Try repeating the programming steps several times.
- If the problem persists, contact a qualified automotive locksmith or your Subaru dealer for assistance.
Questions You May Have
How often do I need to program my key fob?
You only need to program your key fob if it has been lost, damaged, or if you’ve purchased a used vehicle with unprogrammed key fobs.
Can I program my key fob without a working key fob?
No, you’ll need an existing working key fob to program a new or replacement key fob.
How many key fobs can I program to my vehicle?
You can program up to four key fobs to your 2010 Subaru Forester.
What happens if I lose my only working key fob?
If you lose your only working key fob, you’ll need to contact a qualified automotive locksmith or your Subaru dealer to have a new key fob programmed and cut.
Can I program my key fob to work with other Subaru vehicles?
No, key fobs are specific to the vehicle they’re programmed to. You cannot program a key fob from one Subaru to work with another Subaru.