Unlock convenience with ease: how to program your 2015 subaru forester key fob

If you’ve found yourself in need of programming a new key fob for your 2015 Subaru Forester, you’re in luck! This comprehensive guide will walk you through the simple steps to get your key fob up and running in no time. Whether you’ve lost your original key or simply want a spare, programming a new key fob is a straightforward process that you can complete yourself with a few basic tools.

Materials You’ll Need

Before you start, gather the following materials:

• New Subaru Forester key fob
• Original Subaru Forester key fob (if available)
• Screwdriver
• Flathead screwdriver (optional)
• CR2025 battery (if replacing the battery)

Step-by-Step Programming Instructions

1. Prepare the Key Fob

• Insert the CR2025 battery into the new key fob (if needed).
• Locate the small screw on the back of the key fob and remove it using the screwdriver.
• Use the flathead screwdriver (optional) to gently pry open the key fob.

2. Insert the Original Key

• Insert the original key fob into the ignition and turn it to the “On” position.
• Do not start the engine.

3. Remove the Original Key

• Quickly remove the original key fob from the ignition within 10 seconds.

4. Insert the New Key

• Within 10 seconds of removing the original key, insert the new key fob into the ignition.
• Turn the new key fob to the “On” position.

5. Turn the Key Off and On

• Turn the new key fob to the “Off” position.
• Within 10 seconds, turn the new key fob back to the “On” position.

6. Repeat the Process

• Repeat steps 3-5 two more times.

7. Verify Programming

• After completing the third cycle, remove the new key fob from the ignition.
• Press the lock and unlock buttons on the new key fob to verify that it’s programmed.

Troubleshooting Tips

• If the key fob doesn’t program, check that the battery is properly installed and the key fob is assembled correctly.
• Try repeating the programming steps again.
• Ensure that you’re using a genuine Subaru Forester key fob.

Additional Tips

• If you have multiple key fobs to program, you can program them one after the other following the same steps.
• It’s recommended to replace the battery in the original key fob if it’s been used for an extended period.
• Keep your key fobs away from strong magnetic fields, as this can interfere with their operation.

The End of Your Programming Journey

Congratulations! You’ve successfully programmed your 2015 Subaru Forester key fob. Now you can enjoy the convenience of unlocking your vehicle and starting it with the touch of a button.

Frequently Asked Questions

Q: Can I program a used key fob to my Subaru Forester?
A: Yes, you can program a used key fob as long as it’s compatible with your vehicle. However, it’s important to note that the used key fob may have been previously programmed to another vehicle, and you’ll need to erase that programming before using it with your Subaru Forester.

Q: How do I erase the programming from a used key fob?
A: To erase the programming from a used key fob, you’ll need to use diagnostic software or take it to a locksmith or Subaru dealership.

Q: How much does it cost to program a Subaru Forester key fob?
A: The cost of programming a Subaru Forester key fob can vary depending on the method you choose. Programming it yourself is free if you have the necessary materials, while having it done at a dealership or locksmith can cost anywhere from $50 to $200.