Unlock the secrets of your 2018 nissan rogue key fob: step-by-step guide to programming success

Losing your car keys can be a stressful and inconvenient experience, especially if you have a newer model vehicle like the 2018 Nissan Rogue. The good news is that you can program a new key fob yourself without having to visit a dealership or hire a locksmith. In this comprehensive guide, we will provide you with step-by-step instructions on how to program a 2018 Nissan Rogue key fob, ensuring that you can get back on the road quickly and easily.

Prerequisites

Before you begin programming a new key fob, you will need the following:

• A new, uncut Nissan Rogue key fob
• Your original working key fob
• A flathead screwdriver

Step-by-Step Instructions

1. Insert Original Key Fob

Insert your original working key fob into the ignition and turn it to the “ON” position. Do not start the engine.

2. Remove Key Fob and Insert New Key Fob

Quickly remove the original key fob from the ignition and insert the new, uncut key fob within 10 seconds.

3. Turn Ignition to “OFF” Position

Turn the ignition to the “OFF” position and remove the new key fob.

4. Repeat Steps 1-3

Repeat steps 1-3 two more times. You should insert and remove the new key fob three times in total.

5. Turn Ignition to “ON” Position

After the third insertion and removal, insert the new key fob into the ignition and turn it to the “ON” position.

6. Press Lock Button

Press and hold the lock button on the new key fob for about 30 seconds.

7. Release Lock Button and Verify

Release the lock button. The security light on the dashboard should flash three times, indicating that the new key fob has been programmed successfully.

Additional Notes

• If the security light does not flash three times, repeat the programming process from step 1.
• You can program up to four key fobs for your 2018 Nissan Rogue.
• If you have lost all of your key fobs, you will need to have the vehicle towed to a Nissan dealership for reprogramming.

Troubleshooting

Key Fob Not Programming

• Ensure that you are using a new, uncut Nissan Rogue key fob.
• Check that the battery in the new key fob is fresh.
• Make sure you are following the instructions precisely and timing your actions correctly.

Key Fob Not Working

• If the programmed key fob does not work, check the battery again.
• Try using the original working key fob to rule out any issues with the vehicle’s keyless entry system.
• If both key fobs are not working, you may need to have the vehicle’s keyless entry system diagnosed by a mechanic.

Final Note: Programming Your Nissan Rogue Key Fob

Programming a new key fob for your 2018 Nissan Rogue is a straightforward process that can be completed in just a few minutes. By following the instructions outlined above, you can save yourself the time and expense of visiting a dealership or hiring a locksmith. Remember to keep a spare key fob in a safe place in case you lose your primary key fob.

Popular Questions

Q: Can I program a used key fob for my 2018 Nissan Rogue?
A: No, you cannot program a used key fob for your 2018 Nissan Rogue. The key fob must be new and uncut.

Q: How much does it cost to program a new key fob for my 2018 Nissan Rogue?
A: If you program the key fob yourself, it will cost you the price of a new key fob, which is typically around $50-$100. If you have the key fob programmed by a dealership or locksmith, the cost will vary depending on their labor rates.

Q: How do I know if my 2018 Nissan Rogue has a keyless entry system?
A: All 2018 Nissan Rogues come with a keyless entry system.