Access the hidden riches of your subaru forester: how to open and remove the glove box

If you’re looking to replace your Subaru Forester glove box or simply access its contents more easily, removing it is a straightforward process. Follow our comprehensive guide below to get the job done in no time.

Preparation

Before you begin, gather the necessary tools:

• Phillips-head screwdriver
• Trim removal tool (optional but recommended)
• Pry bar or flathead screwdriver (optional)

Step-by-Step Guide

1. Open the Glove Box

Fully open the glove box to expose its interior.

2. Locate the Screws

On the inside of the glove box, you’ll find two Phillips-head screws located near the top corners.

3. Remove the Screws

Using the screwdriver, remove both screws.

4. Disconnect the Damper (Optional)

If your glove box is equipped with a damper, gently pull it out to disconnect it from the glove box.

5. Use a Trim Removal Tool (Optional)

Insert a trim removal tool or a flathead screwdriver into the gap between the glove box and the dashboard. Carefully pry the glove box loose from its clips.

6. Pull Out the Glove Box

Once the clips are released, gently pull the glove box towards you to remove it from the dashboard.

7. Disconnect the Electrical Connector (Optional)

If your glove box has any electrical connections, such as for a light or USB port, disconnect them before completely removing the glove box.

Reinstallation

To reinstall the glove box, simply reverse the steps above:

1. Connect the electrical connector (if applicable)
2. Slide the glove box back into the dashboard
3. Secure it with the screws
4. Connect the damper (if applicable)

Additional Tips

• Be careful not to damage the dashboard or glove box while removing or reinstalling it.
• If you encounter any resistance, do not force it. Instead, check for any remaining clips or screws that need to be removed.
• If you’re replacing the glove box, make sure to transfer any contents or accessories from the old one to the new one.

Troubleshooting

• Glove box won’t open: Check if there’s any debris or objects blocking the latch.
• Glove box won’t stay closed: Ensure that the clips are properly engaged and that the latch is functioning correctly.
• Glove box rattles: Make sure that all screws and bolts are tightened securely and that there are no loose parts inside the glove box.

Final Thoughts: Glove Box Removal with Confidence

Removing the glove box of your Subaru Forester is a simple task that can be completed in a matter of minutes. By following the steps outlined in this guide, you can easily access the contents of your glove box or replace it if necessary.

Frequently Asked Questions

Q: Can I remove the glove box without any tools?
A: It’s possible, but using a trim removal tool or a flathead screwdriver will make the process easier and prevent damage.

Q: Do all Subaru Foresters have glove boxes that can be removed?
A: Yes, all Subaru Foresters have removable glove boxes.

Q: How often should I clean my glove box?
A: Regularly clean your glove box to prevent dust and debris from accumulating and potentially damaging its contents.