Replace your hyundai santa fe rear wiper blade in 5 easy steps: ultimate guide

Maintaining your Hyundai Santa Fe is crucial for ensuring a safe and enjoyable driving experience. One important component that often gets overlooked is the rear wiper blade. A worn-out rear wiper blade can significantly impair your visibility during inclement weather, making it essential to replace it regularly. This comprehensive guide will provide you with step-by-step instructions on how to replace the rear wiper blade on your Hyundai Santa Fe.

Gather the Necessary Tools

Before you begin, gather the following tools:

• New Hyundai Santa Fe rear wiper blade
• Clean cloth or paper towels
• Safety glasses (optional)

Safety Precautions

• Park your Hyundai Santa Fe on a level surface and engage the parking brake.
• Turn off the engine and remove the keys from the ignition.
• Wear safety glasses if desired.

Step 1: Locate the Rear Wiper Arm

• Walk to the rear of your Hyundai Santa Fe and locate the rear wiper arm. It is usually positioned on the driver’s side of the vehicle.

Step 2: Lift the Wiper Arm

• Gently lift the rear wiper arm away from the windshield. Do not force it, as you may damage the arm or the windshield.

Step 3: Remove the Old Wiper Blade

• Hold the old wiper blade firmly and slide it towards the end of the wiper arm.
• Once the wiper blade is fully extended, lift it upwards to detach it from the wiper arm.

Step 4: Insert the New Wiper Blade

• Align the new wiper blade with the wiper arm.
• Slide the new wiper blade onto the wiper arm until it clicks into place.

Step 5: Lower the Wiper Arm

• Carefully lower the wiper arm back onto the windshield.
• Ensure that the wiper blade is making full contact with the windshield.

Step 6: Test the Wiper Blade

• Start your Hyundai Santa Fe and turn on the rear wiper.
• Verify that the wiper blade is functioning correctly and clearing the windshield effectively.

Step 7: Clean the Windshield

• Use a clean cloth or paper towels to wipe down the windshield and remove any dirt or debris.
• This will help ensure that the new wiper blade provides optimal visibility.

Replacing the Rear Wiper Blade on a Hyundai Santa Fe: A Step-by-Step Guide

Materials:

• New Hyundai Santa Fe rear wiper blade
• Clean cloth or paper towels
• Safety glasses (optional)

Safety Precautions:

• Park your vehicle on a level surface and engage the parking brake.
• Turn off the engine and remove the keys from the ignition.
• Wear safety glasses if desired.

Steps:
1. Locate the Rear Wiper Arm: Walk to the rear of your Hyundai Santa Fe and find the rear wiper arm, typically located on the driver’s side.
2. Lift the Wiper Arm: Gently lift the rear wiper arm away from the windshield. Avoid using excessive force to prevent damage.
3. Remove the Old Wiper Blade: Hold the old wiper blade firmly and slide it towards the end of the wiper arm. Once fully extended, lift it upwards to detach it.
4. Insert the New Wiper Blade: Align the new wiper blade with the wiper arm and slide it on until it clicks into place.
5. Lower the Wiper Arm: Carefully lower the wiper arm back onto the windshield, ensuring that the wiper blade makes full contact.
6. Test the Wiper Blade: Start your vehicle and turn on the rear wiper to verify its proper functioning and windshield clearing ability.
7. Clean the Windshield: Use a clean cloth or paper towels to wipe down the windshield and remove any dirt or debris, maximizing the effectiveness of the new wiper blade.

FAQs:

Q: How often should I replace the rear wiper blade on my Hyundai Santa Fe?
A: It is recommended to replace the rear wiper blade every 6-12 months or as needed based on wear and tear.

Q: Can I use a universal rear wiper blade for my Hyundai Santa Fe?
A: Yes, you can use a universal rear wiper blade as long as it is the correct size and type for your vehicle.

Q: Is it difficult to replace the rear wiper blade on my Hyundai Santa Fe?
A: No, replacing the rear wiper blade is a relatively simple and straightforward task that can be completed in a few minutes.