Unlock the secrets of replacing your nissan altima rear view mirror in 5 simple steps
What To Know
- Replacing a rear view mirror on a Nissan Altima may seem like a daunting task, but with the right tools and a step-by-step guide, you can easily complete this job in no time.
- Insert the two screws into the holes on either side of the mirror and tighten them using a Phillips head screwdriver.
- It is not recommended to use a rear view mirror from a different vehicle as it may not fit properly or function correctly.
Replacing a rear view mirror on a Nissan Altima may seem like a daunting task, but with the right tools and a step-by-step guide, you can easily complete this job in no time. This blog post will provide you with detailed instructions on how to replace the rear view mirror on your Nissan Altima.
Tools and Materials
Before you begin, gather the following tools and materials:
- New rear view mirror
- Phillips head screwdriver
- Trim removal tool (optional)
- Clean cloth
- Isopropyl alcohol (optional)
Safety Precautions
- Park your vehicle on a level surface and engage the parking brake.
- Disconnect the negative battery terminal to prevent any electrical hazards.
Removing the Old Mirror
1. Locate the Cover Plates: On either side of the rear view mirror, you will see two small cover plates. Using a trim removal tool or a flathead screwdriver, gently pry these covers off.
2. Unscrew the Screws: Underneath each cover plate, you will find two screws. Use a Phillips head screwdriver to remove these screws.
3. Pull the Mirror Down: Carefully pull the rear view mirror straight down towards the windshield. It will come off easily once the screws are removed.
Cleaning the Mounting Surface
Before installing the new mirror, it is important to clean the mounting surface on the windshield. Use a clean cloth dampened with isopropyl alcohol to wipe away any dirt or debris. This will ensure a secure bond between the new mirror and the windshield.
Installing the New Mirror
1. Align the Mirror: Align the new mirror with the mounting surface on the windshield. Make sure it is centered and level.
2. Apply Pressure: Gently press the mirror into place. You may need to apply some force to ensure it is securely attached.
3. Replace the Screws: Insert the two screws into the holes on either side of the mirror and tighten them using a Phillips head screwdriver.
4. Replace the Cover Plates: Snap the two cover plates back into place over the screws.
Reconnecting the Battery
Once the new mirror is installed, reconnect the negative battery terminal.
Resetting the Mirror
The rear view mirror may need to be reset after it is replaced. To do this, follow the steps outlined in your Nissan Altima owner‘s manual.
Troubleshooting
- Mirror is Loose: If the mirror is loose after installation, tighten the screws further.
- Mirror is Not Level: Adjust the mirror by gently pushing or pulling it until it is level.
- Mirror is Not Reflecting Properly: Check the mirror for any smudges or scratches. Clean the mirror with a clean cloth and isopropyl alcohol if necessary.
In a nutshell: Maintaining a Clear View
Replacing the rear view mirror on your Nissan Altima is a simple and straightforward task that can be completed with ease. By following the steps outlined in this guide, you can ensure that you have a clear and unobstructed view behind your vehicle.
Common Questions and Answers
Q: How often should I replace my rear view mirror?
A: The rear view mirror should be replaced when it becomes damaged, scratched, or obstructed.
Q: Can I use a rear view mirror from a different vehicle?
A: It is not recommended to use a rear view mirror from a different vehicle as it may not fit properly or function correctly.
Q: How do I adjust the rear view mirror to prevent glare?
A: Tilt the mirror up or down to adjust the angle of reflection. You can also use the anti-glare feature on the mirror, if equipped.