Keep the rain away: essential tips for replacing nissan murano windshield wipers

Replacing windshield wipers on your Nissan Murano is a simple and straightforward task that can be completed in a matter of minutes. By following the steps outlined below, you can ensure that your windshield wipers are functioning optimally, providing you with clear visibility while driving.

Safety Precautions

Before beginning the replacement process, ensure your vehicle is parked on a level surface and the engine is turned off. Engage the parking brake to prevent the vehicle from moving unintentionally.

Materials Required

• New windshield wiper blades compatible with your Nissan Murano
• Clean cloth or paper towels
• Optional: Windshield washer fluid

Step 1: Locate the Wiper Arms

Identify the wiper arms located on the base of your windshield. These arms pivot to move the wiper blades across the glass.

Step 2: Lift the Wiper Arms

Gently lift the wiper arms away from the windshield. Do not force them, as they can be damaged. The arms should move up to a near-vertical position.

Step 3: Release the Old Wiper Blades

Locate the small tab or lever on the wiper arm that holds the wiper blade in place. Press on the tab or lever and simultaneously pull the old wiper blade straight up to detach it from the arm.

Step 4: Install the New Wiper Blades

Align the new wiper blade with the wiper arm and slide it into place. Ensure that the blade is securely attached to the arm and that it does not wobble or move freely.

Step 5: Lower the Wiper Arms

Carefully lower the wiper arms back onto the windshield. Ensure that they are fully seated and making contact with the glass.

Step 6: Test the Wiper Blades

Turn on the windshield wipers to test their operation. Check if they are wiping the windshield effectively and without any streaks or skipping.

Step 7: Top Up Windshield Washer Fluid (Optional)

If desired, top up the windshield washer fluid reservoir to ensure that you have enough fluid to clean the windshield when needed.

Troubleshooting

• Wiper blades skipping or streaking: Ensure that the wiper blades are securely attached to the wiper arms and that there is no debris or dirt on the windshield or wiper blades.
• Wiper arms not moving: Check if the wiper motor is functioning properly. If not, consult a qualified mechanic.
• Wiper blades chattering: This can be caused by worn or damaged wiper blades. Replace the wiper blades with new ones.

Conclusion

By following these simple steps, you can easily replace the windshield wipers on your Nissan Murano, ensuring optimal visibility and safety while driving. Remember to regularly inspect and replace your wiper blades to maintain their effectiveness and prevent damage to your windshield.

Frequently Asked Questions

Q1: How often should I replace my Nissan Murano windshield wipers?

A: It is recommended to replace your windshield wipers every 6 to 12 months, or more frequently if you live in an area with extreme weather conditions or drive in dusty environments.

Q2: What are the signs that my windshield wipers need to be replaced?

A: Look for signs of wear and tear, such as streaking, skipping, chattering, or tearing. Also, if your wipers are not making good contact with the windshield, it may be time to replace them.

Q3: Can I use any type of windshield wiper blade on my Nissan Murano?

A: No, it is important to use windshield wiper blades that are compatible with your Nissan Murano’s specific make and model. Refer to your vehicle’s owner’s manual for the recommended wiper blade size and type.