Shattered nissan rogue mirror? replace the glass in minutes with this easy guide

Replacing a broken or damaged side mirror glass on a Nissan Rogue is a relatively straightforward task that can be completed in under an hour with the right tools and materials. This guide will provide you with step-by-step instructions on how to replace nissan rogue side mirror glass, ensuring a seamless and cost-effective repair.

Materials Required

• New side mirror glass (compatible with your Nissan Rogue model and year)
• Screwdriver (Phillips head)
• Pry tool (optional but recommended)
• Clean cloth

Safety Precautions

• Park your Nissan Rogue on a level surface and engage the parking brake.
• Disconnect the negative terminal of your vehicle’s battery to prevent electrical shocks.
• Wear gloves and safety glasses for protection.

Step-by-Step Instructions

1. Remove the Mirror Cap:
Locate the small cap covering the base of the side mirror. Use a screwdriver or pry tool to gently pry off the cap.

2. Unplug the Electrical Connector:
Once the cap is removed, you will see an electrical connector attached to the mirror. Gently squeeze the connector’s tabs and pull it straight out.

3. Loosen the Mirror Mounting Bolts:
Using a screwdriver, loosen the two bolts that secure the mirror assembly to the door. Do not remove the bolts completely at this point.

4. Tilt the Mirror Assembly:
Carefully tilt the mirror assembly towards the front of the vehicle. This will give you access to the mirror glass.

5. Remove the Old Glass:
Locate the small clips holding the mirror glass in place. Use a pry tool or your fingers to gently pry the glass out of the frame.

6. Install the New Glass:
Align the new mirror glass with the frame and gently press it into place. Make sure the clips snap securely.

7. Reassemble the Mirror Assembly:
Tilt the mirror assembly back into its original position and tighten the mounting bolts.

8. Reconnect the Electrical Connector:
Plug the electrical connector back into the mirror assembly.

9. Replace the Mirror Cap:
Snap the mirror cap back into place.

Troubleshooting Tips

• If the mirror glass does not fit properly, check the alignment of the clips and ensure they are securely attached.
• If the electrical connector is damaged, you may need to replace it.
• If the mirror assembly does not tilt easily, apply some penetrating oil to the bolts and let it sit for a few minutes before loosening them.

Wrap-Up: Replacing Side Mirror Glass on a Nissan Rogue

Replacing the side mirror glass on a Nissan Rogue is a straightforward and cost-effective repair. By following these step-by-step instructions, you can restore your mirror’s functionality and enhance your driving safety.

What You Need to Learn

Q1. Can I replace the side mirror glass without removing the entire assembly?
Yes, you can replace the glass without removing the entire assembly. Follow the steps outlined in this guide.

Q2. How can I tell if the electrical connector is damaged?
Look for any broken wires or loose connections. You can also test the connector with a multimeter.

Q3. What type of screwdriver do I need to loosen the mounting bolts?
You will need a Phillips head screwdriver.