Your Toyota companion for all ownership needs
Guide

Tpms malfunction? master the simple steps to reset it on your hyundai kona

What To Know

  • When the pressure in any tire falls below the recommended level, the TPMS light will illuminate on the dashboard to alert you.
  • Once the tire pressure has been adjusted, use chalk or a marking pen to mark the location of the valve stems on the tires.
  • If the TPMS light remains illuminated after multiple reset attempts, it may indicate a more serious issue with the TPMS system or a tire leak.

If you’re a proud owner of a Hyundai Kona, you might have encountered a situation where your Tire Pressure Monitoring System (TPMS) light has illuminated on the dashboard. While it’s essential to address this issue promptly, resetting the TPMS system on your Hyundai Kona is a simple task that you can easily accomplish yourself. In this comprehensive guide, we will provide you with step-by-step instructions and additional insights to ensure a seamless TPMS reset experience.

Understanding the TPMS System

The TPMS system in your Hyundai Kona plays a crucial role in monitoring the air pressure in all four tires. It uses sensors installed inside the tires to transmit real-time pressure data to the vehicle’s computer. When the pressure in any tire falls below the recommended level, the TPMS light will illuminate on the dashboard to alert you.

When to Reset the TPMS System

There are several situations where you may need to reset the TPMS system on your Hyundai Kona:

  • After adjusting the tire pressure in any of the tires
  • When installing new tires or wheels
  • If the TPMS light remains illuminated even after the tire pressure has been adjusted
  • After a tire rotation

Tools Required

To reset the TPMS system on your Hyundai Kona, you will need the following tools:

  • Tire pressure gauge
  • Chalk or a marking pen
  • A key or a small screwdriver

Step-by-Step Instructions

Step 1: Check and Adjust Tire Pressure

Before resetting the TPMS system, it’s important to ensure that the tire pressure in all four tires is at the recommended level. Use a tire pressure gauge to check and adjust the pressure as needed.

Step 2: Mark the Valve Stems

Once the tire pressure has been adjusted, use chalk or a marking pen to mark the location of the valve stems on the tires. This will help you identify the correct valve stems when resetting the TPMS system.

Step 3: Locate the TPMS Reset Button

The TPMS reset button is usually located inside the glove compartment or on the driver’s side kick panel. Consult your vehicle’s owner’s manual for the exact location.

Step 4: Press and Hold the TPMS Reset Button

Insert your key or a small screwdriver into the TPMS reset button and press and hold it for approximately 3 seconds. You may hear a beep or see a message on the dashboard indicating that the TPMS system is being reset.

Step 5: Release the TPMS Reset Button

After holding the button for 3 seconds, release it and wait for the TPMS light on the dashboard to turn off. This may take a few moments.

Step 6: Start the Vehicle

Once the TPMS light has turned off, start the engine and drive for approximately 10 minutes. This will allow the TPMS system to relearn the new tire pressure values.

Step 7: Verify the TPMS Reset

After driving for 10 minutes, check the dashboard to ensure that the TPMS light remains off. If the light is still illuminated, repeat the reset process.

Additional Tips

  • If you encounter any difficulties while resetting the TPMS system, consult your vehicle’s owner’s manual or contact a qualified mechanic.
  • It’s recommended to reset the TPMS system whenever you make any changes to the tires or wheels.
  • If the TPMS light remains illuminated after multiple reset attempts, it may indicate a more serious issue with the TPMS system or a tire leak. In such cases, it’s advisable to have the system inspected by a mechanic.

Final Thoughts: Ensuring Optimal Tire Performance

Resetting the TPMS system on your Hyundai Kona is a simple and essential maintenance task that helps ensure the optimal performance of your tires. By following the steps outlined in this guide, you can easily reset the TPMS system yourself and keep your Kona running smoothly and safely.

Frequently Asked Questions

Q: Can I reset the TPMS system using a code reader?

A: Yes, some code readers have the capability to reset the TPMS system. However, it’s important to consult your vehicle’s owner’s manual or the code reader manufacturer‘s instructions for specific details.

Q: How often should I reset the TPMS system?

A: It’s generally recommended to reset the TPMS system whenever you make any changes to the tires or wheels, such as adjusting the tire pressure, installing new tires, or rotating the tires.

Q: What if the TPMS light comes back on after resetting the system?

A: If the TPMS light remains illuminated or comes back on after resetting the system, it may indicate a more serious issue with the TPMS system or a tire leak. In such cases, it’s advisable to have the system inspected by a qualified mechanic.

Was this page helpful?
Back to top button