Start your toyota 4runner with a dead key fob: the ultimate solution
What To Know
- A dead key fob can leave you stranded and frustrated, especially if you’re in a remote area or in a hurry.
- Most Toyota 4Runners come with a physical key that can be used as a backup in case the key fob fails.
- Start the engine of the other vehicle and let it run for a few minutes to charge your 4Runner’s battery.
A dead key fob can leave you stranded and frustrated, especially if you’re in a remote area or in a hurry. But don’t despair! There are ways to start your Toyota 4Runner even with a dead key fob. In this comprehensive guide, we’ll explore the various methods you can use to get your vehicle up and running again.
Override with the Physical Key
Most Toyota 4Runners come with a physical key that can be used as a backup in case the key fob fails.
1. Locate the keyhole on the driver’s side door.
2. Insert the physical key into the keyhole and turn it to the “Unlock” position.
3. Open the door and enter the vehicle.
Use the Emergency Key Fob
Some Toyota 4Runners have an emergency key fob that is stored inside the main key fob.
1. Remove the mechanical key from the main key fob.
2. Insert the emergency key fob into the keyhole on the driver’s side door.
3. Turn the emergency key fob to the “Unlock” position.
4. Open the door and enter the vehicle.
Jump Start the Battery
If the battery in your Toyota 4Runner is completely dead, you may need to jump start it.
1. Park another vehicle with a working battery next to your 4Runner.
2. Connect the positive terminal of the jumper cables to the positive terminal of your 4Runner’s battery.
3. Connect the negative terminal of the jumper cables to an unpainted metal surface on your 4Runner’s engine.
4. Start the engine of the other vehicle and let it run for a few minutes to charge your 4Runner’s battery.
5. Try starting your 4Runner.
Reset the Key Fob
Sometimes, a dead key fob can be revived by resetting it.
1. Remove the battery from the key fob.
2. Press and hold the “Unlock” and “Lock” buttons simultaneously for 10 seconds.
3. Reinsert the battery into the key fob.
Replace the Key Fob Battery
A dead key fob battery is the most common cause of key fob failure.
1. Locate the battery compartment on the key fob.
2. Open the battery compartment and replace the old battery with a new one of the same type.
Reprogram the Key Fob
If your key fob is still not working after replacing the battery, you may need to reprogram it.
1. Turn the ignition switch to the “On” position.
2. Press and hold the “Lock” button on the key fob for 30 seconds.
3. Release the “Lock” button and turn the ignition switch to the “Off” position.
4. Repeat steps 1-3.
Call Toyota Roadside Assistance
If you are unable to start your Toyota 4Runner using any of the above methods, you can call Toyota Roadside Assistance. They will provide you with assistance and may be able to replace or reprogram your key fob.
Key Points: Stay Prepared
Having a dead key fob can be an inconvenience, but it doesn’t have to leave you stranded. By following the steps outlined in this guide, you can start your Toyota 4Runner and get back on the road quickly and safely. Remember to keep a spare key or emergency key fob in your vehicle for peace of mind.
Basics You Wanted To Know
Q: Can I use a universal key fob to start my Toyota 4Runner?
A: No, universal key fobs are not compatible with Toyota vehicles.
Q: How often should I replace the battery in my key fob?
A: The battery in your key fob should be replaced every 2-3 years.
Q: Can I reset my key fob if it is lost or stolen?
A: Yes, you can reset your key fob by contacting your local Toyota dealership.