Unveiling the secrets: master the art of towing jeep renegade with active drive

The Jeep Renegade is a versatile SUV that can handle a variety of tasks, including towing. However, if your Renegade is equipped with Active Drive, there are a few things you need to know before towing. In this comprehensive guide, we’ll provide step-by-step instructions on how to tow a Jeep Renegade with Active Drive safely and effectively.

Understanding Active Drive

Active Drive is a four-wheel drive system that automatically adjusts the amount of power sent to each wheel based on road conditions. This system provides excellent traction and stability, both on- and off-road. However, when towing, it’s important to disable Active Drive to prevent damage to the system.

Disabling Active Drive

1. Park the Renegade on a level surface.
2. Shift the transmission into Neutral.
3. Turn the ignition key to the “OFF” position.
4. Open the hood and locate the Active Drive module. It is usually located on the top of the transmission.
5. Unplug the electrical connector from the Active Drive module.

Preparing the Renegade for Towing

1. Connect the safety chains from the trailer to the Renegade’s frame.
2. Plug the trailer’s electrical connector into the Renegade’s receptacle.
3. Insert the tow ball into the Renegade’s receiver hitch.
4. Raise the trailer tongue until it is level with the Renegade’s bumper.
5. Secure the trailer tongue with a locking pin.

Towing with the Renegade

1. Start the Renegade and shift into Drive.
2. Gradually accelerate and maintain a safe speed.
3. Avoid sudden stops and starts.
4. Use the trailer brakes to assist with stopping.
5. Monitor the Renegade’s instruments for any warning lights or messages.

Re-enabling Active Drive

1. Park the Renegade on a level surface.
2. Shift the transmission into Neutral.
3. Turn the ignition key to the “ON” position.
4. Reconnect the electrical connector to the Active Drive module.
5. Close the hood.

Safety Tips

• Always follow the manufacturer’s instructions for towing.
• Use a tow bar that is rated for the weight of the trailer.
• Do not exceed the Renegade’s maximum towing capacity.
• Drive slowly and carefully when towing.
• Be aware of the trailer’s swing when turning.
• Check the trailer’s tires and brakes before each use.

Key Points: Towing with Confidence

By following these instructions, you can safely and effectively tow a trailer with your Jeep Renegade equipped with Active Drive. Remember to disable Active Drive before towing, prepare the Renegade properly, and drive cautiously. With the right knowledge and preparation, you can enjoy the versatility of your Renegade for both on- and off-road adventures.

What People Want to Know

Q: Can I tow a trailer with a Jeep Renegade that has Active Drive II?

A: Yes, you can tow a trailer with a Renegade that has Active Drive II. However, you must disable Active Drive II before towing.

Q: What is the maximum towing capacity of a Jeep Renegade with Active Drive?

A: The maximum towing capacity of a Jeep Renegade with Active Drive is 2,000 pounds.

Q: Do I need to use a weight-distributing hitch when towing with a Jeep Renegade?

A: A weight-distributing hitch is not required when towing with a Jeep Renegade, but it is recommended for trailers that exceed 1,000 pounds.