Ultimate guide: unraveling the mystery of jeep renegade flat towing
What To Know
- Flat towing, the process of towing a vehicle behind another vehicle with all four wheels on the ground, offers unparalleled convenience and cost savings.
- Flat towability encompasses the ability of a vehicle to be towed with its transmission in neutral and the drive wheels disengaged from the drivetrain.
- Can I flat tow a Renegade with a manual transmission.
For adventure-seekers and RV enthusiasts alike, the question of “is Jeep Renegade flat towable” lingers like an elusive enigma. Flat towing, the process of towing a vehicle behind another vehicle with all four wheels on the ground, offers unparalleled convenience and cost savings. However, not all vehicles are designed to withstand the rigors of flat towing, making it crucial to determine the Renegade’s flat towability.
Understanding Flat Towability and Its Implications
Flat towability encompasses the ability of a vehicle to be towed with its transmission in neutral and the drive wheels disengaged from the drivetrain. This allows the towed vehicle’s wheels to roll freely, eliminating the need for a trailer or dolly.
Jeep Renegade: Unveiling its Flat Towability Status
The answer to the burning question is: Yes, the Jeep Renegade is flat towable. However, this capability is only available on select models and trim levels.
Flat Towable Models and Trim Levels
- Renegade Trailhawk (2015-2023)
- Renegade Limited (2015-2023)
- Renegade Upland (2019-2023)
Technical Specifications for Flat Towing
To ensure safe and successful flat towing, the Renegade must be equipped with the following:
- Transfer Case: Active Drive Low (ADL)
- Transmission: 9-speed automatic transmission
- Rear Axle: 3.21:1 or 3.73:1 gear ratio
Step-by-Step Guide to Flat Towing a Jeep Renegade
1. Prepare the Renegade:
- Engage the parking brake.
- Shift the transmission into neutral.
- Disconnect the negative battery terminal.
2. Connect the Tow Bar:
- Attach the tow bar to the Renegade’s front tow hooks.
- Connect the safety chains.
3. Secure the Electrical Connection:
- Plug the electrical connector from the tow vehicle into the Renegade’s receptacle.
4. Tow Safely:
- Keep the speed below 55 mph.
- Avoid sudden stops and turns.
- Monitor the Renegade’s transmission temperature.
Benefits of Flat Towing a Jeep Renegade
- Convenience: No need for a trailer or dolly.
- Cost Savings: Eliminates the expense of a trailer and its maintenance.
- Versatility: Allows for easy access to off-road trails and remote locations.
Precautions and Limitations
- Transmission Damage: Failure to follow proper flat towing procedures can lead to transmission damage.
- Speed Restrictions: Exceeding 55 mph can overheat the transmission.
- Model and Trim Level Restrictions: Only specific Renegade models and trim levels are flat towable.
Key Points: Unveiling the Truth
In conclusion, the Jeep Renegade is flat towable on select models and trim levels. By adhering to proper flat towing procedures, you can safely and conveniently tow your Renegade behind your RV or other vehicle. Unleash the Renegade’s adventurous spirit and embark on unforgettable journeys without the limitations of a trailer or dolly.
Answers to Your Questions
Q1: Can any Jeep Renegade be flat towed?
A: No, only select models and trim levels are flat towable.
Q2: What is the maximum towing speed for a flat towed Renegade?
A: 55 mph.
Q3: Does flat towing affect the Renegade’s warranty?
A: Flat towing according to Jeep’s guidelines does not void the warranty.
Q4: What is the best towing vehicle for a Renegade?
A: A vehicle with a towing capacity of at least 3,500 pounds.
Q5: Can I flat tow a Renegade with a manual transmission?
A: No, only Renegades with a 9-speed automatic transmission are flat towable.