Your Toyota companion for all ownership needs
Guide

Diy suzuki intruder vs 800 oil change: save money and keep your ride running smoothly

What To Know

  • Whether you own a Suzuki Intruder or an 800, it’s crucial to understand the differences in oil change procedures and requirements between these two models.
  • This guide will provide a comprehensive overview of the oil change process for both the Suzuki Intruder and 800, helping you to ensure optimal engine health and performance.
  • Both the Suzuki Intruder and 800 use the same oil filter, which is a Suzuki OEM filter or an equivalent aftermarket filter.

Regular oil changes are essential for maintaining the longevity and performance of your motorcycle. Whether you own a Suzuki Intruder or an 800, it’s crucial to understand the differences in oil change procedures and requirements between these two models. This guide will provide a comprehensive overview of the oil change process for both the Suzuki Intruder and 800, helping you to ensure optimal engine health and performance.

Oil Type and Capacity

Suzuki Intruder

The Suzuki Intruder requires SAE 10W-40 motorcycle oil. The oil capacity for the Intruder is 3.1 quarts (2.9 liters) with a filter change.

Suzuki 800

The Suzuki 800 also requires SAE 10W-40 motorcycle oil. The oil capacity for the 800 is 3.7 quarts (3.5 liters) with a filter change.

Oil Filter

Both the Suzuki Intruder and 800 use the same oil filter, which is a Suzuki OEM filter or an equivalent aftermarket filter.

Oil Change Procedure

Suzuki Intruder

Materials:

  • 3.1 quarts (2.9 liters) of SAE 10W-40 motorcycle oil
  • New oil filter
  • Drain pan
  • Funnel
  • Wrench

Steps:

1. Warm up the engine for a few minutes to thin the oil.
2. Place the drain pan under the oil drain plug.
3. Remove the oil drain plug using a wrench.
4. Allow the oil to drain completely.
5. Replace the oil drain plug with a new washer.
6. Remove the old oil filter using a filter wrench.
7. Apply a thin layer of oil to the gasket of the new oil filter.
8. Screw on the new oil filter by hand until it is snug.
9. Pour 3.1 quarts (2.9 liters) of new oil into the engine using a funnel.
10. Check the oil level using the dipstick and add more oil as needed.
11. Start the engine and let it run for a few minutes.
12. Check for any leaks and re-tighten the oil drain plug and oil filter if necessary.

Suzuki 800

Materials:

  • 3.7 quarts (3.5 liters) of SAE 10W-40 motorcycle oil
  • New oil filter
  • Drain pan
  • Funnel
  • Wrench

Steps:

1. Warm up the engine for a few minutes to thin the oil.
2. Place the drain pan under the oil drain plug.
3. Remove the oil drain plug using a wrench.
4. Allow the oil to drain completely.
5. Replace the oil drain plug with a new washer.
6. Remove the old oil filter using a filter wrench.
7. Apply a thin layer of oil to the gasket of the new oil filter.
8. Screw on the new oil filter by hand until it is snug.
9. Pour 3.7 quarts (3.5 liters) of new oil into the engine using a funnel.
10. Check the oil level using the dipstick and add more oil as needed.
11. Start the engine and let it run for a few minutes.
12. Check for any leaks and re-tighten the oil drain plug and oil filter if necessary.

Oil Change Interval

Both the Suzuki Intruder and 800 require oil changes every 2,500 to 4,000 miles, or every 3 to 6 months, whichever comes first. However, it is recommended to check the oil level regularly, especially before long trips.

Signs of Dirty Oil

  • Dark or discolored oil
  • Oil with a burnt smell
  • Oil that contains metal shavings or other debris
  • Oil that is low on the dipstick

Importance of Regular Oil Changes

Regular oil changes are essential for several reasons:

  • Removes contaminants and debris from the engine
  • Lubricates moving parts and reduces friction
  • Cools the engine
  • Prevents sludge and varnish buildup
  • Extends engine life

In a nutshell

Understanding the oil change procedure for your Suzuki Intruder or 800 is crucial for maintaining optimal engine health and performance. By following the steps outlined in this guide and adhering to the recommended oil change interval, you can ensure that your motorcycle runs smoothly and efficiently for years to come.

Questions You May Have

Q1: Can I use a different type of oil in my Suzuki Intruder or 800?
A1: No, it is recommended to use SAE 10W-40 motorcycle oil to ensure optimal performance and protection.

Q2: How often should I change the oil filter?
A2: It is recommended to change the oil filter every time you change the oil.

Q3: Can I perform an oil change myself?
A3: Yes, with the right tools and knowledge, you can perform an oil change yourself. However, if you are not comfortable doing so, it is recommended to take your motorcycle to a mechanic.

Q4: What are the consequences of not changing the oil regularly?
A4: Not changing the oil regularly can lead to premature engine wear, sludge buildup, and reduced performance.

Q5: How can I check the oil level on my Suzuki Intruder or 800?
A5: Use the dipstick to check the oil level. The oil level should be between the “min” and “max” marks on the dipstick.

Was this page helpful?
Back to top button